Acer X32 FP 165Hz 4K IPS with 576-zone Mini LED backlight

As an Amazon Associate I earn from qualifying purchases made using the “Buy” button at the bottom of this post. Where possible, you’ll be redirected to your nearest store. Further information on supporting our work.

Update: Changes made to model designation and feature set. News piece below initially published 7th October 2021.


A range of monitors now combine the ‘4K’ UHD resolution with a ~32″ screen size and high refresh rate. An increasing number of these also offer HDMI 2.1, allowing 120Hz ‘4K’ output on games consoles such as the PS5 and Xbox Series X. The Acer X32 FP offers all of these attractive features, whilst also throwing in a high level of HDR capability. The styling is is similar to others in the Predator series, with a coated metal stand base with contoured feet and an artistically designed stand neck. Referred to in some regions as a ‘Dragon Claw Base’. The bottom bezel is dark grey plastic, whilst the top and side bezels adopt a dual-stage design. Including a slim panel border flush with the rest of the screen and a slender hard plastic outer part. The OSD (On Screen Display) is controlled by buttons and a joystick at the rear of the screen, running down the right side as viewed from the front.

A 32” IPS-type panel is adopted with 3840 x 2160 (‘4K’ UHD) resolution – the AU Optronics M320QAN02.8 AHVA (Advanced Hyper Viewing Angle) panel more specifically. A 165Hz refresh rate is supported alongside Adaptive-Sync, including Nvidia’s ‘G-SYNC Compatible Mode’ with a 48 – 165Hz VRR range plus LFC assumed. Integrated VRR is also expected to be offered by the HDMI 2.1 port. Other aspects of note include a 1200:1 static contrast ratio, 178°/178° viewing angles and 10-bit colour support. A light to very light matte anti-glare screen surface is expected. A flicker-free Quantum Dot Mini LED backlight delivers a ≥99% Adobe RGB colour gamut and 1200 cd/m² peak HDR luminance, with 576 dimming zones. A factory calibrated sRGB emulation mode is also included, with a specified DeltaE

A 1ms or ‘up to 0.5ms’ grey to grey response time is specified. As usual, don’t pay too much attention to such figures – though note that this is a grey to grey measurement rather than MPRT as specified on some competing models. Low Blue Light (LBL) settings are also included, promoting a more relaxing viewing experience. The stand attaches centrally via 100 x 100mm VESA and can be replaced by a VESA 100 compatible alternative if preferred. The included stand offers tilt, swivel and height (120mm or 4.72 inches) adjustment. The ports mainly face downwards and include; AC power (internal power converter), DP 1.4 (with DSC), 2 HDMI 2.1 ports, USB-C (90W PD, DP Alt Mode, upstream data), 3.5mm audio output, 3.5mm audio input and USB 3.0 ports – exact number TBC. 2 USB 3.0 ports may be found at the left side as viewed from the front. KVM support is also expected, so an additional USB upstream port will be included. 2 x 7W speakers also feature.

The rear view

Further details can be found on this page (Chinese, requires translation) on Taobao and this Instragram post by Acer Taiwan. Information we’ve been given via manufacturer reps suggests possible ~$1300 pricing with availability expected February 2022. Note that the images, specs and pricing given here are subject to change.

Acer X32 FP

Source link

We will be happy to hear your thoughts

Leave a reply

Shopping cart