LG 40WP95C 72Hz 5120×2160 IPS UltraWide

As an Amazon Associate I earn from qualifying purchases made using the “Buy” button at the bottom of this post. Where possible, you’ll be redirected to your nearest store. Further information on supporting our work.

The extra width of UltraWide monitors can be useful for productivity, whilst providing an immersive experience for gaming and movie viewing. The LG 40WP95C (40WP95C-W owing to the white rear) offers this experience, scaled up to a diagonal screen size of 39.7″. The monitor has the usual modern styling associated with many models from the brand, with a silver-coloured ‘crescent’ stand. The monitor adopts the now common dual-stage bezel design, with a fairly slim panel border flush with the rest of the screen. And a slender hard plastic outer part. The OSD (On Screen Display) is controlled by a joystick facing downwards in the centre of the bottom bezel. An integrated light sensor allows the screen to adjust its brightness according to ambient lighting.

A 39.7″ 5120 x 2160 (21:9 UltraWide) Nano IPS panel is adopted with fairly gentle 2500R curve and light matte anti-glare screen surface. This is similar in height and pixel density to a 32″ 3840 x 2160 (‘4K’ UHD) model with extra horizontal space and pixels. A 72Hz refresh rate is supported, with Adaptive-Sync including AMD FreeSync offered with 48 – 72Hz VRR range. A 1000:1 static contrast ratio is specified, alongside 178°/178° viewing angles and 10-bit (8-bit + FRC) colour. The screen is factory calibrated with support for hardware calibration using ‘Calibration Studio’ software and a compatible colorimeter. A flicker-free WLED backlight provides a 98% DCI-P3 colour gamut and 300 cd/m² typical maximum luminance. The monitor responds to HDR10 content, offering a basic HDR experience without a high peak luminance by HDR standards or local dimming. But allowing 10-bit colour processing and the generous DCI-P3 gamut to be put to good use.

A 5ms grey to grey response time is specified (approach with caution), with an integrated low input lag or DAS (Dynamic Action Sync) feature also included. The backlight’s peak of blue energy is shifted to a less energetic wavelength which can potentially aid viewing comfort. An additional Low Blue Light (LBL) setting referred to as ‘Reader Mode’ is included, promoting a more relaxing viewing experience. The stand attaches centrally via a quick-release mechanism and can be removed to reveal 100 x 100mm VESA holes for alternative mounting. The stand offers tilt, swivel and height (110mm or 4.33 inches) adjustment. Most of the ports face backwards in a recessed area to the left of the stand attachment point and include; 2 Thunderbolt 4 ports (96W PD, DP Alt Mode, upstream data), DP 1.4, a 3.5mm headphone jack, 2 HDMI 2.0 ports and AC power (internal power converter). 2 USB 3.0 ports are located at the right side of the screen, as viewed from the front. 10W down-firing ‘Rich Bass’ stereo speakers are included, whilst 2-device PbP is supported.

A white rear

Further details can be found on the manufacturer’s website. The monitor is listed for ~$2000 USD.

LG 40WP95C

Source link

We will be happy to hear your thoughts

Leave a reply

Shopping cart